Date:         Wed, 9 Sep 1998 10:53:27 -0700
Reply-To:     coyote <coyote@LIKEMINDS.COM>
Sender:       Vanagon Mailing List <Vanagon@vanagon.com>
From:         coyote <coyote@LIKEMINDS.COM>
Subject:      Re: Paulchen Rack Questions
Comments: To: Dave <dave@V-DUB.MUSA.COM>, Vanagon@VANAGON.COM
In-Reply-To:  <005e01bddbb5$7d254540$35cdce80@k6-233>
Content-Type: text/plain; charset="iso-8859-1"

>I recently purchased a used Paulchen rack and have a few questions;  First,
>I have a bike with a large diameter seat tube, the paulchens method of
>gripping the tube does not work, do they sell an adapter for large diameter
>tubes?  Also, where can I get accessories for my new rack?  And finally how
>do I know if I have a new or old style rack?  I am assuming it's old style
>because it says "Made in W. Germany" and well it's been a while since West
>Germany's existed.  My rack is black with a fold down tray with room for 2
>bikes, 2 points to attach the clamps that hold the seat tubes and a brass
>lock which I don't have the key for yet, does this sound like the old or new
>style?  Thanks

The old style is shown at
   http://www.vanagon.com/info/vehicles/beethoven/paulchen.html

The new style is silver, I believe, rather than black.

My rack (old style) doesn't have a gripper for the seat tube, but that may have been an option.  I got the spacer bar, which holds
bikes away from the body (see the web page above.)

Coyote

--                      /\_/\      ____
Ron 'Coyote' Lussier   (     )     \ _/__             LikeMinds, Inc.
coyote@likeminds.com    \   /       \X  /              457 Bryant St.
1.415.284.6972           \_/          \/ San Francisco, CA 94107-1316