Date: Mon, 14 Sep 1998 20:34:13 -0500
Reply-To: Racer X <akimmons@PDQ.NET>
Sender: Vanagon Mailing List <Vanagon@vanagon.com>
From: Racer X <akimmons@PDQ.NET>
Subject: Re: Brake and Clutch fluid change in 91 Vanagon
Content-Type: text/plain; charset=us-ascii; x-mac-type="54455854";
x-mac-creator="4D4F5353"
Dennis Haynes wrote:
> That vacuum pump should have come with a special grease to seal the bleeder
> screw threads.
>
> Dennis
>
> -----Original Message-----
> From: Yi-Ruey Wei <ray.wei@US.PWCGLOBAL.COM>
> To: Vanagon@VANAGON.COM <Vanagon@VANAGON.COM>
> Date: Sunday, September 13, 1998 1:04 PM
> Subject: Re: Brake and Clutch fluid change in 91 Vanagon
>
> >I bought a "OEM" brand lifetime warranty 'Vacuum Pump' at AutoZone for $25
> >which can be used on on-person brake bleeding. The vacuum pump IS the
> >Mityvac hand held pump. But it also comes with the necessary tubes,
> >adapters and jar. I used it to bleed all brake/clutch fluid with very
> >satisfactory result. One thing I've found was the vacuum will leaking out
> >around the bleeder nut. You may have to pump faster to overcome the leak.
> >I'd like to have a 2nd person (NOT your wife, if you know what I mean) to
> >pump the break pedal since it's a lot faster and more pressure to push out
> >the old fluid. But for clutch slave cylinder, I'd use the vacuum pump
> >since the Bentley said so. BTW, the bleeder nut on clutch slave cylinder
> >is very easy to access from engine the compartment. Don't try to do the
> >bleeding from underneath. And don't skip this bleeding step because you'll
> >amazed how dirty the old fluid will be when it evacuated out.
> >Good luck,
> >Yi-Ruey Wei
> >87 Vanagon GL Syncro w/78K miles
> >85 Jetta GLI w/165K miles
> >Dallas, Texas (It finally rained)
> >
> >
> >
> >
> >Richard O'Halloran <ohalloran@IATRONET.NET> on 09/13/98 02:15:26 AM
> >
> >Please respond to Richard O'Halloran <ohalloran@IATRONET.NET>
> >To: Vanagon@VANAGON.COM
> >cc:
> >Subject: Brake and Clutch fluid change in 91 Vanagon
> >
> >
> >I want to change my brake fluid (long overdue unfortunately) and I don't
> >have a pressure bleeder or even a vacuum device. I can do the brakes OK the
> >simple way (found it in the archives) but how do I do the clutch? Bentley
> >says to only use a pressure bleeder for this. Should I just ignore bleeding
> >the clutch and hope that enough of the new brake fluid will work it's way
> >through? Would a Mityvac vacuum type system work for the clutch bleeder
> >valve? And does the Mityvac work better for the brake side of things as
> >well? Can I try to work the clutch pedal in the same way as the brake
> >pedal?
> >Should I do the brakes first or the clutch first or does it matter?
> >
> >Thanx for this.
> >
> >Rich
> >
> >Yeah...I've got one of those too... It SUCKS!!
(that's a good thing in this case...)
>
>
>
> >----------------------------------------------------------------
> >The information transmitted is intended only for the person or entity to
> >which it is addressed and may contain confidential and/or privileged
> >material. Any review, retransmission, dissemination or other use of, or
> >taking of any action in reliance upon, this information by persons or
> >entities other than the intended recipient is prohibited. If you received
> >this in error, please contact the sender and delete the material from any
> >computer.
>
|