I bought a roll of insulation and made my own. The stuff I used is made of plastic bubble material with aluminium foil on both sides. It is available at hardware and RV stores here in Arizona. I made a screen for the front window and individual screens for the cabin windows and the rear window. I put two suction cups on every screen execpt the one for the front window which is held in place by the sunvisors. The rear side window screens stay in place all the time. I put up and take down the other screens in about three minutes. It helps a lot, but it is still not enough:( John-Reed Maffeo '86 Syncro Glacie |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.