Date:         Mon, 21 Sep 1998 21:42:55 -0500
Reply-To:     Harmon Seaver <hseaver@HARMON.BML.USOUTHAL.EDU>
Sender:       Vanagon Mailing List <Vanagon@vanagon.com>
From:         Harmon Seaver <hseaver@HARMON.BML.USOUTHAL.EDU>
Organization: Maddog Press
Subject:      VDO Oil Temp Sender plate!
Comments: To: type2@type2.com
Comments: cc: vanagon@vanagon.com
Content-Type: text/plain; charset=us-ascii

Somebody told me that the cyl.head temp sender I was looking for was
available as a seperate item from BusBoys, and while I was looking, I
saw that they also had available for $19.95 that little sump plate,
pre-drilled for the oil temp sender. Sure wish I'd known that before I
ruined two plates (first one I had the wrong sender and it was too big,
second one I put the hole in the exact right place, but had the plate
upside down, so -- anyway, the 3rd time was good).


--
Harmon Seaver hseaver@harmon.bml.usouthal.edu
http://harmon.bml.usouthal.edu
=======================================================================
All is impermanent, but this too shall pass away, and the way of the
Samurai is death -- so speak your mind now, or forever hold your peace.
=======================================================================
Copyright, Harmon F. Seaver, 1998. License to distribute this post is
available to Microsoft for US$1,000 per instance, or local equivalent.
=======================================================================