Date:         Thu, 17 Sep 1998 10:53:00 -0600
Reply-To:     Gary Shea <shea@GTSDESIGN.COM>
Sender:       Vanagon Mailing List <Vanagon@vanagon.com>
From:         Gary Shea <shea@GTSDESIGN.COM>
Subject:      Re: more on the Wiper Motor
Comments: To: Mark Mages <mmages@GIE.COM>
Comments: cc: Vanagon@VANAGON.COM
In-Reply-To:  <36012329.6D6FD936@gie.com>
Content-Type: TEXT/PLAIN; charset=US-ASCII

Mark -- The external wiper arm fits onto a splined shaft.  Probably due
to not tightening it down enough, I managed to strip a wiper arm and
saw something similar to what you have, but it was a gradual process.
Sounds more like something's come loose between the motor and the
wiper arm in your case... but it's been so long since I've looked
in there... Bentley shows a couple of 'relay rods', so it's possible
that one of those has somehow popped off...

        Gary

On Thu, 17 Sep 1998, Mark Mages wrote:
> Ok, I just want to get the list opinion on the motor, (thanks to those
> who offered to pull/sell one) and make sure I am replacing the right
> thing.
>
> To anyone who has replaced one (or had one go bad)
>
> The wiper feels like a gear is stripped inside.  When off, I can turn
> the wiper at least 180deg with no resistance, while the one that
> functions doesn't move at all.  If it was just the motor, wouldn't there
> still be some resistance, or is this the typical symptom of a bad motor
> - it is one of the few things I haven't had break on one of my cars...
>
> This may be a stupid question, but I just don't have the funds to get a
> "professional" opinion right now.  Besides, y'all have a lot more
> experience with vans than my current "professional" :)
>
> Mark
> 87 Westy
> 84 Rocco (140k&still does 110mph:)- found that out last night....
>