Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (September 1998, week 3)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Sat, 19 Sep 1998 10:24:25 -0700
Reply-To:     Todd Last <rubatoguy@WORLDNET.ATT.NET>
Sender:       Vanagon Mailing List <Vanagon@vanagon.com>
From:         Todd Last <rubatoguy@WORLDNET.ATT.NET>
Subject:      Speedbleeder info/question
Comments: To: Vanagon List <Vanagon@vanagon.com>
Content-Type: text/plain; charset=us-ascii


I found the info on speedbleeders at  http://www.speedbleeder.com/


Does anyone know the sizes that the Vanagon would use for the brakes and
clutch??


Todd


=========== SpeedBleeder size info ===================


Here are the sizes that they carry:


Part Number          Thread Size                     Overall Length
                             Inch or SAE                       in., (mm)


 SB1428                  1/4 X 28                          1.00, (25.41)
 SB51624#             5/16 X 24                         1.04, (26.44)
 SB3824#               3/8 X 24                           1.10, (28.16)
 SB3824L*              3/8 X 24                           1.51, (38.55)
 SB3824LL**          3/8 X 24                            1.53, (39.05)
 SB71620              7/16 X 20                           1.27, (32.42)


 Metric
SB6100                6mm X 1.0                          1.13, (28.87)
SB7100                7mm X 1.0                          1.33, (33.98)
SB8100                8mm X 1.0                          1.26, (32.20)
SB8125****         8mm X 1.25                        1.08, (27.66)
SB8125L***         8mm X 1.25                        1.26, (32.00)
SB8125LL             8mm X 1.25                        1.51, (38.37)
SB1010S*****    10 mm X 1.0                        1.29, (32.89)
SB1010               10 mm X 1.0                        1.37, (34.95)
SB10125             10mm X 1.25                       1.28, (32.73)
SB1015              10mm X 1.5                         1.28, (32.73)




   *  Short Hex
  **  Long Hex
 ***  Long nipple, makes it easy to attach hose
 **** Most closely resembles stock bleeder screw
 ***** Shorter point, provides more thread engagement for shallow hole depth


           Also available in 303 stainless steel for CUSTOM applications
such as Harley Davidson and
           Chevrolet Corvette.
Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.