1991 Vanagon 2.1L : I have a coolant leak (slow) in the 4" rubber hose that connects the metal crossover tube from the water pump to the plastic flanged pipe that connects to the right Head. I choose to replace both pipes (heard the metal one rusts internally and the plastic one cracks), hose, water pump and temp sender and expansion tank with new cap while the coolant system is drained. Does anyone know of a source for these pipes besides the dealer? Ron at Busdepot say dealer only. Also, do you need to coat the gaskets (silcone base stuff at FLAPS) at the pipe flange connections to the water pump and head or just mount them as-is ?? Any advise greatly appreciated. Rob Lebo '91 CARAT 105K York, PA |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.