Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (September 1998, week 4)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Wed, 23 Sep 1998 23:21:57 -0400
Reply-To:     John Anderson <janderson@IOLINC.NET>
Sender:       Vanagon Mailing List <Vanagon@vanagon.com>
From:         John Anderson <janderson@IOLINC.NET>
Subject:      Re: head electrolysis cure?
Comments: To: vanagon@vanagon.com
Content-Type: text/plain; charset="iso-8859-1"

>Mark, > > A sacrificial anode needs to be a block of metal electrically connected >to the metal you are trying to protect. So I do not think metal disolved >in the coolant would do what you want. The anode will end up as a disolved >salt in the coolant when it is corroded instead of the metal you are protecting.

This may actually work and in point of fact nearly all Wasserboxers come with such a thing, we typically call it the transmission case. A close inspection thereof on earlier vans in salt climates will show that it is rapidly dissapearing protecting the aluminum engine case. Terrifyingly dissapearing in some instances, the Mg alloy being more reactive than the aluminum apparently. I've proposed these and other methods over the years but decry any form of electrolytic protection to any real extent as the problem seems electrochemical and physical in nature. Certainly corrosion is always due to difference in potential, but on most vans, that difference isn't a lot. But another clue struck me the other day as I sandblasted the upper coolant tube for a 1.9, these steel tubes rust like mad in these climes, can rust out every 4-5 years!!! Take a look at what they do, they connect manifold runner to manifold runner and thereby via the intake bolts, head to head for another current path. Interesting. I personally always daisy chain a heavy braided ground from chassis to head to block to head, particularly on 1.9's who IMNSHO usually suffer major FI maladies from the stock ground strap disintegrating and the ground return for the engine passing through the myriad of FI grounds on the drivers side head. It is usually necessary to cut several inches off those grounds, crimp on new connectors, and solder them to insure proper smooth running on a 1.9 in the rust belt at these ages. Some of the wires may need full replacement if they have carried too much current and become to embrittled (O2?) Anyway I do these things but still don't think they are worth a damn as the physical problems will still initiate corrosion, but hell it doesn't hurt, and a couple chunks of Mg on the heads wouldn't either. FWIW VW did start placing sacrificial annodes on the body to fender joints in the mid 80's. Most underground utilities use Mg annodes as corrosion prevention on underground steel lines, and an old EE friend of dads used to swear by bolting pieces to the frame of his car in numerous locations and replacing them when they dissapeared. He had a '71 Chevy pickup in far better condition than its age and mileage warranted. TIFWIW.

John janderson@iolinc.net


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.