>One of the adjustment rods in the passenger seat armrests has >come completely free from whatever it was screwed into. I fail to see >how to access the area within the upholstered section where the thing >came undone (those little screws on the black plastic part don't do >it). Any thoughts?
Suzanne, Find a description how to secure the armrests: http://www.parsimony.net/forum/forum165/messages/934.htm It isn't easy to find out, but if you know, it will be done within 30 minutes. Sorry, description is in German language, but use a web translater or one of the listmembers should take that part. In general: There is a secure bolt inside the axle between the arm- and back rest. Push the bolt out from the rear. Secure the screws you will find at the backrest, use some glue, otherwise it will be loose some month later again. Helmut '80 Vanagaudi |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.