Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (October 1998, week 2)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Mon, 12 Oct 1998 04:19:54 -0500
Reply-To:     Max/Joyce Wellhouse <maxjoyce@IPA.NET>
Sender:       Vanagon Mailing List <Vanagon@vanagon.com>
From:         Max/Joyce Wellhouse <maxjoyce@IPA.NET>
Subject:      Re: Adhesive "Gunk" Removal - NO Xylene, MEK, or Toluene!
Comments: To: Marty Wallace <martywallace@ROCKETMAIL.COM>, Vanagon@VANAGON.COM
Content-Type: text/plain; charset=ISO-8859-1

Marty and group: If the Westy top is Fiberglass, there should be no problem. If the Westy top is a vaccuformed piece of plastic, there could be problems. Perhaps the ScotchBrite tool is the best method. I've never had trouble with the aforementioned solvents degredating fiberglass composites and I was under the impressin from previous posts that the Westy top was indeed fiberglass. Do I need to be re-educated?

Dimwitted moose and Flying Squirrel AR 90GL 123k

---------- > From: Marty Wallace <martywallace@ROCKETMAIL.COM> > To: Vanagon@VANAGON.COM > Subject: Re: Adhesive "Gunk" Removal - NO Xylene, MEK, or Toluene! > Date: Monday, October 12, 1998 1:30 AM > > Just a suggestion, but NO WAY would I recommending using MEK, toluene or > xylene - MANY of the materials on a Westy are soluble in these solvents. > > These solvents might be effective in removing the residual adhesive, but > then they might effective in dissolving the pop-top as well... :-) > > For what it's worth, > > Marty Wallace, grad. student & Chemistry Geek > Department of Chemistry > California State University, Chico > 1984 Westfalia "Heisenberg" > > ------------------------------------------------ > >Date: Sun, 11 Oct 1998 12:39:24 -0500 > >From: Max/Joyce Wellhouse <maxjoyce@IPA.NET> > >Subject: Re: Sticker Removal~&~Need Mirror > ---<snip>--- > >Rather than use acetone which evaporates too quickly, a slightly slower > >evaporating solvent would work better like Methyl Ethyl Ketone, Tolulene, > >or Xylene. Be very careful and juducious about how much you glop on the > >vertical serface if you choose to use the chemicals. > >Dimwiteed Moose and flying squirrel AR 90GL > >---------- > > From: Kristin Dewey <Goldenroad@AOL.COM> > > To: Vanagon@VANAGON.COM > > Subject: Sticker Removal~&~Need Mirror > > Date: Saturday, October 10, 1998 6:30 PM > > Hey folks... > > 1. What should I use to remove the grungy deteriorating "Westfalia" > letters > > from my westy top? > > :o) Kristin > > 84 Wolfsburg GL Westy~Wolfy > > 90 Subaru Legacy LS SW AWD~Althea > > > > > _________________________________________________________ > DO YOU YAHOO!? > Get your free @yahoo.com address at http://mail.yahoo.com


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.