Date: Tue, 13 Oct 1998 22:15:53 +0000
Reply-To: Racer X <akimmons@PDQ.NET>
Sender: Vanagon Mailing List <vanagon@vanagon.com>
From: Racer X <akimmons@PDQ.NET>
Subject: Re: oil leak found? (oil cooler)
Content-Type: text/plain; charset=us-ascii; x-mac-type="54455854";
x-mac-creator="4D4F5353"
You must check the oil cooler nut whenever changing oil, it will become
loose and cause a leak. Most likely, you don't have to buy a new cooler.
There is a o-ring type gasket behind the oil cooler though that should be
changed if you are already leaking...
mac stricklen wrote:
> After work this evening I crawled under my '80 Vanagon with some Foamy
> Engine Brite and a hose and cleaned off all of the oil that was
> smeared on the bottom of the engine and the exhaust system. I then
> started it up and waited for the drip to begin.
>
> It didn't take long. Soon, I was able to clearly see a steady
> dripping from something that I was only able to identify at that time
> as "the silver box-like thing that's kind of above the oil filter."
>
> I turned off the engin and went to the manuals (Muir and Bentley) I
> looked through the pictures in Bentley until I found one that seemed
> to indicate that "the silver box-like thing" was an oil cooler.
>
> I looked under oil leaks in the index in Muir and found mention of the
> oil cooler being a common source of oil leaks.
>
> So, to all of you experience mechanics out there, does this sound
> right. Is this my oil cooler that seems to be leaking.
>
> If so, I get the impression that the only solution is replacing it.
> $99.95 from Bus Depot--which I guess could be a lot worse.
>
> My question is this---What to I need to do to replace it. Bently
> doesn't really say (typical), and Muir says that I'll have to remove
> the engine. However, I get the impression that Muir could really be
> talking about breadloaf buses and not really vanagons. To me that
> fact that I can see almost the whole oil cooler by squatting and
> looking through the wheel well suggests that removal might be possible
> from the bottom without having to take out the whole darn engine.
> Could the be true?
>
> thanks,
> mac
>
> P.S. I was planning on ordering the Haynes manual tommorrow AM--does
> anyone know if this will shed a little more light on the oil cooler
> thing?
>
> _________________________________________________________
> DO YOU YAHOO!?
> Get your free @yahoo.com address at http://mail.yahoo.com
| 
