David, Yes, I had a hard time removing the guards. They where rusted in different places. I was able to get all the bolts out except the last one. Good thing for me, the guard was rusted near the bolt allowing me to remove it. I don't think it was worth it, I should have just loosen a hose to let it drain out. The "tee" sounds like the way to go. Let me know about any info on it. Thanks DAN In a message dated 10/27/98 12:43:23 AM, you wrote: <<So you took off these guards? Were they bolted to the exhaust outtakes like on mine? > Opened the bleed > value in the engine and the radiator, opened all heaters, and flushed and > filled. This was not as easy as your basic car and radiator flushes. If you or > anyone find an easy way like installing a tee somewhere please let me know. Yes, there are those that have used a tee. I'll forward their messages separately. >> |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.