Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (October 1998, week 5)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Fri, 30 Oct 1998 17:13:15 -0800
Reply-To:     Old Volks Home <jim@OLDVOLKSHOME.COM>
Sender:       Vanagon Mailing List <vanagon@vanagon.com>
From:         Old Volks Home <jim@OLDVOLKSHOME.COM>
Subject:      Re: Fuel Line and Clamp Prices
Comments: To: Bulley-Hewlett & Associates <gmbulley@BULLEY-HEWLETT.COM>,
          vanagon@VANAGON.COM
In-Reply-To:  <01BE0430.77A69620@ip223.raleigh4.nc.pub-ip.psi.net>
Content-Type: text/plain; charset="us-ascii"

At 05:51 PM 10/30/98 -0500, Bulley-Hewlett & Associates wrote: >Bill Knight >Raleigh, NC wrote: > >Also found special 7mm hose that is called "fabric reinforced rubber" hose, >which has the cloth woven between two layers of rubber. I'm told it is the >absolute best hose for fuel injection. It costs $12 per meter. Has anyone >heard of this hose? >>>>>>>>>>>>>>>>>>>>>>>>>> >Yes, just now. :) Actually, that is what the PO had on our van. Would love >to get more and would even get the little clampets, if you'll lemme know >whar you saw them. ***************************************** In my personal opinion, these are the best clamps one can use on your FI hoses and unfortunately, they are expensive - I get $1.20 to $1.25 each myself and these are the ones VW uses as well.

N 241222 Mini Clamp Injector to Fuel Rail (4 req) $1.20ea N 10258201 Mini Clamp For all other FI Connections $1.25ea

Why are these better? Aftermarket worm-drive clamps can cut into the hose if overtightened, which leads to premature deterioration and possible leaks. The factory style clamps are a "band" type that the screw (7mm hex) goes through a threaded piece on the opposite side of the clamp. I just wish my sources had a better price on these clamps, but at least these are the OE German.

The special high pressure hose you mention is the correct hose (current VW PN N90025319, old N20281.1 [which is the number I still use]). I get $2.98/foot. For all VW Bus and Vanagon FI applications (replaces the cloth covered originally used on the late Buses).

Jim Thompson 84 Westy 2.1 * 62 Sedan * 90 Fox Wagon Check out our latest cool stuff at: http://www.oldvolkshome.com ------------------------------------------- Check out the Odd, Weird, One of a Kind Items For Sale On the "OddBall Page" http://www.oldvolkshome.com/oddball.html ------------------------------------------- Sherwood Automotive * The Old Volks Home PO Box 176 * Palo Cedro, CA 96073-0176 (530) 221-5342 (Voice or Fax) jim@oldvolkshome.com jim96003@c-zone.net


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.