Dear Ari,
Wheel bearings are engineered for a certain optimal loading "balance" -- this is maintained by offset, which should be proportionately smaller for each increase in width. The math is quite simple, actually. For example, the theoretical offsets for Vanagon rim widths should be:
5.5" rim = ET35 (stock) 6.0" rim = ET31.8 6.5" rim = ET28.6 7.0" rim = ET25.4 7.5" rim = ET22.3 8.0" rim = ET19.1 8.5" rim = ET15.9
In practice, you buy what you can. For example, my 14x7" rims have an offset of ET23, which is close enough. The problem with a 6" Mercedes/Audi rim is that it has an offset of ET43, which is not "close enough" to the engineered optimum in my book (i.e. it is off by 11mm). Summary: ET43 is bad for handling, bad for wheel bearing life.
Cheers, MJS
At 01:50 PM 10/31/98 -0800, Ari Ollikainen wrote: >Not a flame...but isn't it true that MORE track would cause bearing >damage quicker that LESS track? Or does it depend on dynamics as >far as loading the wheel bearings is concerned. A 9/16" inch >displacement seems a bit too trivial to worry about, other than >the more obviousl wheelwell clearance problem...
<bold>Michael J. Sullivan </bold><italic>Director of Catalog Design Open Market, Inc. </italic> '87 GL Syncro Westfalia ******************************************** work: http://www.openmarket.com vanagon: http://www.hsdesign.com/vanagon scan tips: http://www.hsdesign.com/scanning ******************************************** |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.