Date:         Mon, 2 Nov 1998 09:07:46 -0800
Reply-To:     KBatzler <KBatzler@EMAIL.MSN.COM>
Sender:       Vanagon Mailing List <vanagon@vanagon.com>
From:         KBatzler <KBatzler@EMAIL.MSN.COM>
Subject:      Fw:      headlights
Comments: To: Vanagon <Vanagon@VANAGON.COM>

Top on headlight is TOP.  Should fit in exactly the same way the sealed
beams did.  The way I adjust Euro lights is to find a level area adjacent to
a commercial building (like a grocery store), back up about 30 ft.  Measure
the height of the headlamp to the center, then measure at the wall...light
should shine approximately 1" lower.  As for the angle that goes in an angle
up,  the left lamp should be 1" to the right and the right lamp should point
straight ahead.  I also install these lamp on my fathers 81 and they work
wonderful (despite the incorrect belief in this country that you'll blind
people...never had a problem....even tried driving towards the van oncoming
with another car...no problem at all).  Try this and see what happens.
Karl Batzler
84 Vanagon
-----Original Message-----
From: Philip Hanson (Volt Computer) <a-phanso@MICROSOFT.COM>
To: vanagon@VANAGON.COM <vanagon@VANAGON.COM>
Date: Monday, November 02, 1998 6:36 AM
Subject: headlights


>I got a set of halogen headlamps from BusDepot for my '80.  They don't
>really fit in the slots.  And I guess the side that says Top on the from is
>the top.  Anyone experienced with these?  Do the lights have to be adjusted
>when you put them in?  Like because they shine out at a different angle or
>something?  I thought this was going to be easy.  And one of the lights
>doesn't work!  ph '80.
>