Date:         Wed, 11 Nov 1998 14:37:05 -0500
Reply-To:     Derek Drew <drew@INTERPORT.NET>
Sender:       Vanagon Mailing List <vanagon@vanagon.com>
From:         Derek Drew <drew@INTERPORT.NET>
Subject:      Re: BFG Radial AT Spare Tire--fitting it in there
Comments: To: Robyn Rudisill <robyn.rudisill@home.com>
Comments: cc: vanagon@vanagon.com
In-Reply-To:  <4.1.19981111132213.009ea900@seattle>
Content-Type: text/plain; charset="us-ascii"

yes it tends to rub.

the solution is to take these two steps:

1. push the tire slightly to the right front of the vehicle

2. get a big washer--like 1/2 inch or larger, and a longer bolt, and
use the washer so the spare tire carrier no longer gets bolted up
quite so high.

If you push that tire out of the way and then use a file folder in
there you can push it around until the tire no longer rubs the
steering shaft.

At 01:27 PM 11/11/98 -0600, you wrote:
>Derek,
>
>Do you have a problem fitting you spare tire in the stock position?
 Mine
>is rubbing like hell on the steering connecting shaft.  Just wonder
what
>you did or if you're having the same problem.
>
>Thanks for your time.
>
>Robyn Rudisill
>91 Syncro Westy
>
________________________________________________________
Derek Drew                              New York, NY & Washington,
DC
drew@interport.net
'90 Syncro Westfalia...
...seen off-road at http://www.tiu.net/~des/vw/drew/index.html

        Also seen at: http://www.pipeline.com/~tforhan/swrange.htm
                     http://4wd.sofcom.com/VW/snow.html
                     http://www.pipeline.com/~tforhan/swmassn.htm
                     http://4wd.sofcom.com/VW/Campers/Campers.html

        Note: most valuable Vanagon sites on the planet (for owners)
are:

http://gerry.vanagon.com/cgi-bin/wa.exe?S1=vanagon
                    ftp://gerry.vanagon.com/pub/