In a message dated 98-11-20 10:54:34 EST, DanielisOk@aol.com writes: << I have seen ads from body shops that claim that they can fix bumpers. Has anyone had experiance with something like that? Can doing that crack t >>
do it yourself. all you need is a heavy flat headed metal mallet or hammer, and a block of wood. remove the bumper, lay it face down on a piece of plywood or something flat, and hammer the dents out from the back, using the block of wood between the hammer and the bumper, keeping the hammer from making little peen marks. chris |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.