Bill, Thanks, you saved me $22. I stopped in at Sears and the only stud remover they had was of a size that looked like it would do exactly as you described. I passed. Cliff -----Original Message----- From: Bill Knight <bill@ns.esc.state.nc.us> To: cdo9@CSI.COM <cdo9@CSI.COM> Date: Tuesday, November 24, 1998 1:22 PM Subject: RE: Removing Head Studs
>Make sure the one you get from Sears is not too big. The one I bought >seemed just about right, but was really too big. When I put lots of torque >on it, the cam would eventually roll over its peak and lose the grip. So >get the smallest one you can which will still accept the stud. In fact, >carry a stud in to Sears with you just to be sure. I wasted 26 bucks. You >don't need to do the same! > >Bill > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.