Date:         Tue, 24 Nov 1998 10:59:33 -0600
Reply-To:     cdo9@CSI.COM
Sender:       Vanagon Mailing List <vanagon@vanagon.com>
From:         Cliff <cdo9@CSI.COM>
Subject:      Re: Removing Head Studs
Comments: To: akimmons@pdq.net, vanagon@vanagon.com
Content-Type: text/plain; charset="iso-8859-1"

Tony,

Sears carries the stud removal tool - it's around 26 bucks. I'm going to
check also with MAC and Snap-On too.

My head gasket job has also turned into a rebuild, but I think I can beat
you by a couple of months <G>.

Cliff

-----Original Message-----
From: Racer X <akimmons@pdq.net>
To: Cliff Ober <cdo9@csi.com>
Date: Monday, November 23, 1998 10:20 PM
Subject: Re: Removing Head Studs


>Good to hear you're getting those studs out.
>I'm in SW Houston also...Spring Branch/Memorial area.
>I keep an eye out for ya and give you the wave if I spot you.
>I'll be in the dark grey 87GL, if I ever get it on the road again.
>My head gasket job turned into a 6 month engine rebuild. Just put it
>back in this past weekend. Runs very rough still...Got to play around
>with it some, but at least I got it started again!
>
>You'll have to post where you find that stud removal tool. That sounds
>like something I need to add to my tool shed for the future.
>
>See you on the streets!
>Tony
>