Date:         Mon, 30 Nov 1998 10:19:57 -0500
Reply-To:     Patrick Hatcher <PHatcher@BIOPOP.COM>
Sender:       Vanagon Mailing List <vanagon@vanagon.com>
From:         Patrick Hatcher <PHatcher@BIOPOP.COM>
Subject:      Answer to my  Two Questions
Comments: To: "vanagon list (E-mail)" <Vanagon@VANAGON.COM>
Content-Type: text/plain

> >>Q1:  Any ideas of how to get the old sticker residue completely off?
If it
> >>were another surface, I'd probably try lighter fluid or something,
but
> >>I'm worried about what it would do to the fiberglass.
> >>
> >>Q2: Right front turn signal problems.

Ok, first the solutions to my questions . . .

1.  I used "Goo Gone" to take the sticker residue off the pop top.  Then
I used a bleach based mildew cleaner to clean the rest of the pop top.
It all looks magnificent.  Another lister (Bill) suggested putting a
coat of "Nu-Gloss" on it, and I plan to do so.

2.  I feel really stupid.  At the suggestion of fellow lister Steve
Green, I went out on Wed. evening and checked the connections on my bulb
socket.  Although they matched the other side perfectly, they were not
in the right place.  I had the brown (negative) in the correct position
(middle), but the gray and the black wires needed switching.  So, once
again, I need to remember to try the simple things before making it all
too difficult.  Thanks to all the help and suggestions from the list,
especially David Beierl, who really went out of his way to help me out.


Thanks!

-Patrick