In a message dated 98-12-07 10:15:13 EST, hanran.inc@INTERNETMCI.COM writes: << Remove the two Phillips head screws; turn the mirror over, and tighten the nut against the spring. Eye-ball it, 'cause there's no spec other than a "feel." Refit the gasket. Tighten the two screws. Adjust the mirror. >>
dont know if all of you realize, but the original poster of this was talking about a power mirror....completely different adjustment technique from manual mirrors.....(budd premack described the proceedure well :<) chris |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.