Hi Helmut et al, The rear disc brakes on an Audi 5000T may be worth checking out. Same bolt pattern, and from experience I can tell you that they will work inside a 14" vanagon rim. I have used mmy spare vanagon M+S snow tires on the rear of the Audi for 2 winters, keeps the back from sliding out on snow nicely. They would be an ideal place for a kit to be developed from. The parking brake works via the main piston/caliper so wheel hub mods should be minimal, I suspect. An adapter to provide a flat hub surface to draw the disc/wheel against is needed which would likely be made to accept the two bolts from the caliper as well. Time for some measuring and drawing. bye, Tim |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.