Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (December 1998, week 1)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Thu, 3 Dec 1998 21:01:15 -0700
Reply-To:     Michael Harrnacker <harrnack@IN-TCH.COM>
Sender:       Vanagon Mailing List <vanagon@vanagon.com>
From:         Michael Harrnacker <harrnack@IN-TCH.COM>
Subject:      Re: calipers rattle
Comments: To: db25 <Douglas_M_BENSEN@UMAIL.UMD.EDU>, vanagon@VANAGON.COM
Content-Type: text/plain; charset="iso-8859-1"

I had a similar rattle on my Golf, the mechanic said there are "anti-rattle springs" (simple, huh?). The springs hold the pads in place to prevent them from rattle as you drive. Hope this helps.

Michael B. Harrnacker 89 Weekender "Nameles" 91 Golf "Miami" http://ruralinstitute.umt.edu/vwbus vanagon@rudi.montech.umt.edu

"Never miss a good chance to shut up."

-----Original Message----- From: db25 <Douglas_M_BENSEN@UMAIL.UMD.EDU> To: vanagon@VANAGON.COM <vanagon@VANAGON.COM> Date: Monday, November 30, 1998 11:27 AM Subject: calipers rattle

>I've been trying to hunt down a rattle in the front end since I've owned the >van, almost 2 years now. I've replaced everything part that I thought could >cause this noise. I've spent real money at the dealer with no luck, and >then spent more just to rule out a maybe. This weekend while >replacing the radiator and laying under the van I just started beatin around >on stuff with a rubber mallet for the fun of it. I found that I could >reproduce a similiar nose. It seems the calipers rattle on the sliding >pins. I can move them by hand and make them rattle. I think I have finally >narrowed it down. The calipers are rebuilt and came with new guide pins, >but the calipers I took off rattled also. How much play is supposed >to be there? I can't think of any way of tying them down to make sure. When I >thought it was the shocks, I could just remove them and drive to the special >bump that always makes it thump. Not sure what to do. If anyone has any >ideas, I'm open to suggestions. I hope it's something simple and cheap >because I replaced all the difficult and expensive parts. > >Thanks, >Doug >'86 GL Westy >Maryland


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.