> You may use the EV 15" steel wheels 6x15 ET44, they have the needed load > capacity, too. But the offset is wrong and have to be adjusted by spacers. > In front you may use 22mm and rear 27mm. At 2WD Vanagons you have to > drill the center hole to fit the axle. > I don't know if the spacers will allow tire chains, they are very closed > to the wheelwell. You may choose different spacers, the standard Vanagon > rims have ET39 depth. Can I just machine pieces of aluminum for spacers? US listees: Or can I buy appropriate spacers in the US? Where and how much? I assume I probably have to get longer studs in the rear to use the spacer, right? /Martin |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.