OK, here goes the offset discussion again! I recently installed new '98 Passat steel wheels, offset ET45, on my Syncro, whoa-they are 6mm closer to the center of the van! I will say once again- they fit PERFECTLY, no spacers were required! Also used stock Vanagon lugnuts. Tires I used were 215/75/15 Bridgestone Blizzaks, absolutely NO problem with clearance or handling. And, with the Blizzak, there really is no need for chains anyway. If you really MUST have the rim in exactly the same relation as the original, then add a 6mm (1/4") spacer. You should still have enough stud length remaining. Karl |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.