I have this problem. It appeared right after the dealer installed a new clutch, disc, and TO bearing. I replaced the slave cyl with no change. Bled the brakes with a pressure bleeder like the big boys, still a problem. Soon it will be torn apart and the following done: Surface flywheel New pressure plate, disc, TO bearing, TO yoke bushings Lube Full report when it's done....... Randy
R. Hotchkiss wrote: > Hey all, > > I recently replaced my leaking clutch slave cylinder and to my surprise > I no longer have a clutch chatter. I've had the chatter for 32k > miles...since I bought it...and thought it was the pilot bearing as had > been mentioned by others. > > If you have a chatter problem, cheap try is to rebuild your slave > cylinder. > > Hotch > 86 Vangon GL > 89 Jetta GL > Philly |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.