Date:         Sat, 9 Jan 1999 22:50:36 -0600
Reply-To:     cdo9@CSI.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Cliff Ober <cdo9@CSI.COM>
Subject:      Re: digifant  ecu chip
Comments: To: Darrell Boehler <midwesty@midwest.net>
Content-Type: text/plain; charset="iso-8859-1"

Darrell,

I didn't find it in a cross ref listing, just looked up the specs for
the TI part and then looked for a close match from a manufacturer that I
knew Digi-Key stocks. The National data sheet for the LMC6482 lists it
as an improved substitute for the TI part. I hope it works out for
y'all, and that nothing else is wrong with that ECU.

Cliff


-----Original Message-----
From: Darrell Boehler <midwesty@midwest.net>
To: Cliff Ober <cdo9@csi.com>
Date: Friday, January 08, 1999 3:27 PM
Subject: Re: digifant ecu chip


>--------------------
>Hi Cliff,
>    Digi-key had the exact part you mention and it is on the way to
Makanda
>Illinois. I was getting a signal into this chip and nothing out of it
most
>of the time. The chip is inline between the oxygen sensor and the micro
>processor.  What book did you use to cross reference this chip from ti
to
>national?
>    Budd and I both are indebted to you, he had a broken ecu and I told
him
>I would give it a shot. The new bosch ecus have a few chips I can't
convert.
>Thanks so very much for your help.
>Darrell