Date:         Fri, 8 Jan 1999 20:22:52 -0800
Reply-To:     KBatzler <KBatzler@EMAIL.MSN.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         KBatzler <KBatzler@EMAIL.MSN.COM>
Subject:      Re: Vanagon AFM Problems

I received several positive responses from those who installed the
"capacitor fix".  The ground cable I attached from an un-used thread in the
back side of the AFM, installed a bolt that would fit....attached a wire
from there to ground (which I attached to a nut at the back of the
alternator housing.  It may also be possible to move the arm so that it
swings on a different path on the carbon track.  I read here on the list
somewhere that this was possible, but haven't done this myself...so I can't
elaborate on moving the arm too much.
Hope this helps you.
Karl Batzler
84 Vanagon
-----Original Message-----
From: Bowie, Mark T <Mark.Bowie@West.Boeing.com>
To: 'KBatzler@EMAIL.MSN.COM' <KBatzler@EMAIL.MSN.COM>
Date: Friday, January 08, 1999 4:43 PM
Subject: Vanagon AFM Problems


>Karl-
>
>I read with interest your post to the Vanagon list concerning the AFM.
>I've been struggling with the hesitation problem for some time, have read
>everything I can find in the archives, and still haven't solved the
problem.
>Did you receive any responses on repairing and tuning your AFM? Could you
>share them with me?
>Also- you mentioned you grounded the AFM when you installed the capacitor.
>Where did you make the connections?
>
>Thanks
>
>Mark Bowie
>Orange, CA
>