While you're in there, be sure to squirt a gallon of rust protection (like Krown) on the shelf (behind the tail light) malcolm s Tim wrote: > <snip> Take out the tail light and housing an you get easy access. > Clean the silt/mud/leaves out and wedge a 1/2" thick bit of wood > to keep the elbow off the floor. Clear any drain holes in the tin. > Might check the relays in there for crud while you are at it. And > submerging your Syncro to that depth when fording is pushing it, > the block of wood won't help you then either ;). bye, Tim |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.