Hello again, Thanks to all for the feedback on water pump changing. Well, I decided to replace the water pump myself. So far, it has been pretty easy, just messy. Anyway, I pulled the old pump out and it was really trashed. I guess I found the cause of the mysterious rattle I have been hearing. The impeller has about 1/8" play in it and has not only ground off part of the pump, but ground about 1mm off of the block. I suspect that the 1mm off will not help efficiency, but should not be a serious problem. My concern is the obvious amount of metal filings present in the coolant around the pump. Is there a good way to flush this out? Are there any nice magnetic plugs in there to collect filings like this? Please respond directly as my new job has required me to unsubscribe. Thanks in advance, Vernon Craddock Vernon@Craddock.Com 1990 Standard Vanagon |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.