Date:         Wed, 27 Jan 1999 07:35:58 -0800
Reply-To:     Vernon Craddock <Vernon@CRADDOCK.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Vernon Craddock <Vernon@CRADDOCK.COM>
Subject:      Best method to flush metal shavings from coolant system?
Content-Type: text/plain; charset="us-ascii"

Hello again,

        Thanks to all for the feedback on water pump changing.  Well, I decided to
replace the water pump myself.  So far, it has been pretty easy, just
messy.  Anyway, I pulled the old pump out and it was really trashed.  I
guess I found the cause of the mysterious rattle I have been hearing.  The
impeller has about 1/8" play in it and has not only ground off part of the
pump, but ground about 1mm off of the block.  I suspect that the 1mm off
will not help efficiency, but should not be a serious problem.  My concern
is the obvious amount of metal filings present in the coolant around the
pump. Is there a good way to flush this out?  Are there any nice magnetic
plugs in there to collect filings like this?

Please respond directly as my new job has required me to unsubscribe.

Thanks in advance,
Vernon Craddock
Vernon@Craddock.Com

1990 Standard Vanagon