Date:         Wed, 27 Jan 1999 19:07:31 -0500
Reply-To:     George Mitchell <dg942@FREENET.CARLETON.CA>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         George Mitchell <dg942@FREENET.CARLETON.CA>
Subject:      Transporter Needed
Comments: To: vanagon@vanagon.com

 Hello not quite quite sure who I'm writing to got this address from Kyle
at Eurospec.

 The name's Rune and I'm looking for Transporters. Anything watercooled
with or without engines, transmissions, etc. Looking for straight bodies
with rolling suspensions. Some rust ok but nothing structural. I'm from
the Ottawa, Ontario, Canada area. Will collect  from north eastern USA.
Also diesel conversion parts required. Pan, mounts, Transmission
bellhousings , etc. Also a decent Syncro van is also on the list. Blown
engines or blown water jacket gaskets ok.

 Anyone interested  in a TDI engine conversion? Looking for a donor
vehicle. Current concept would include upgrading Complete vehicle wiring
harness to System Three wiring. Sounds intimidating but isn't. Best
upgrades are always done using factory parts. If I can stuff a VR6 into a
Rabbit convertible (Winter '96/'97) with full factory wiring and vag 1551
compatible (dealer scan tool) a van should be no problem. Plus as an added
side bar, reliability with great power and gas mileage.

  For those USA residents take advantage of our currently pitiful Canadian
dollar.

              Rune Mitchell owner/operator Auto Allemagne. (819) 682-5000