Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (February 1999, week 1)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Sun, 7 Feb 1999 09:56:33 -0500
Reply-To:     Sheila Pearson <sheikh@DRAGONET.ES>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Sheila Pearson <sheikh@DRAGONET.ES>
Subject:      Re: O2 Sensor
Comments: To: "Joe L." <jliasse@TOAST.NET>
Content-Type: text/plain; charset=us-ascii

"Joe L." wrote:

> The only thing that ended up working for me is to take the pipe off and > attack it from the inside with a good penetrating oil (J. B. Blaster). > Otherwise you will never be able to get to the threads where the "weld" > occured. Repeated heating with a torch along with repeated rapping with a > hammer. Make sure you have a pipe wrench handy for when you srip the flats > off the nut (WHEN, not if). A three foot or so length of pipe for a > additional leverage on the pipe wrench is also good. > Be prepared to near destroy the old sensor while trying to take it off. > If it is "welded" on there too tightly is is possible to snap the nut off > and leave the theads in the pipe. > > If I had to do it over again I would pull the exhaust pipe and take it > to a local machine shop. They will get it off for about $15 or so provided > you have not done too much damage to the sensor trying to take it off > yourself. > > If yours is anything like mine pack a BIG lunch and tell the wife you > will be gone for a day or so and to ignore any shreaks of profanity coming > from the garage. > > > -----Original Message----- > > From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com]On Behalf > > Of TWessner > > Sent: Saturday, February 06, 1999 11:29 AM > > To: vanagon@GERRY.VANAGON.COM > > Subject: O2 Sensor > > > > > > Hi Guys! > > > > I'm in the process of changing my O2 sensor on my 84 Westy. The > > old sensor > > seems to have become severely corroded and I'm having a heck of a time > > getting it to come loose. Any suggestions other than massive doses of > > WD-40? Any tips would be much appreciated. > > > > Thanks, > > > > Trent Wessner > > Saskatchewan, Canada > > twessner@cableregina.com > >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.