Vanagon EuroVan
Previous (more recent) messageNext (less recent) messagePrevious (more recent) in topicNext (less recent) in topicPrevious (more recent) by same authorNext (less recent) by same authorPrevious page (February 1999, week 1)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Thu, 4 Feb 1999 11:18:51 -0800
Reply-To:     Dana Morphew <kdm@WHIDBEY.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Dana Morphew <kdm@WHIDBEY.COM>
Organization: Dana's Mobile Carpet Steam
Subject:      How to determine when coolent additives need to be replenished
Content-Type: text/plain; charset=us-ascii

We, John and me, have been wondering if there is a way, (a test kit would be excellent), to test coolant for adequate levels of additives. There is no objective argument we know of to support changing the coolant if: it still retains the original color, is close to a neutral ph, and still has a sufficient amount of the additives package. No apparent reason to discard coolant that has been mixed with, and topped off with, distilled or a low 'dissolved minerals' containing water no matter how long its been in use as long as it passes muster. Specifically the two categories of additives are the water pump lube and the 'anticorrosives'. A test for neutral or above ph, >6.9, is a good thing to do also, and it probably is important not to have it excessively alkaline, (say above 8 or 9?), or excessively acid.

At the moment I'm using NAPA's 'number 13'. It's a 12oz. bottle that claims it "...stops rust and prevents electrolytic or "battery" type corrosion. Prevents wear on all types of coolant-lubricated water pumps. Contains no silicates." The ingredients are: petroleum oil, sodium petroleum sulfonate, nonylphenol polyethoxylate, and water. I'm guessing the petroleum oil and sodium petroleum sulfonate are for the water pump and the nonylphenol polyethoxylate is for corrosion/electrolytic prevention. This nonylphenol polyethoxylate might be the item we would most like to check for.

The bottle reads: "For over 20 qt. capacity use two bottles." I give my vehicles the 'bottle prescribed dose' every two years since that is what the majority of coolant manufacturers recommend as the change interval. I've been doing so with the same coolant for six years now and have not yet had to replace a water pump. Any corrosion in my engines is tough to know, but my heaters still work well; the engines don't overheat. I've read somewhere that too much of a good thing is possible here and may have detrimental consequences, (can't remember specifically what), so I would stick with two year intervals.

Comments please. We would like to know if there is something we have failed to consider here. -Dana-


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.