Date:         Tue, 2 Feb 1999 13:39:51 -0800
Reply-To:     Ian Cameron <ianc@UVIC.CA>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Ian Cameron <ianc@UVIC.CA>
Subject:      Gauges
Comments: To: vanagon@vanagon.com
Content-Type: text/plain; charset="us-ascii"

I'm about to add oil pressure, oil temp and cylinder head temp gauges to my
'82 Westy.  I could figure out the installation for myself, but with luck I
won't have to.  Three questions.
1.  Any particular route for the sending wires better than any other?
2.  What's the easiest switched current source?  I'd prefer not to have to
cut any wires.
3.  Where can I get power for the lights?
Thanks in advance.

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.