Date:         Sat, 20 Feb 1999 19:33:03 -0800
Reply-To:     S_J_ WACKER <s_j_wacker@JUNO.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         S_J_ WACKER <s_j_wacker@JUNO.COM>
Subject:      Re: Syncro Parts or standard?
Content-Type: text/plain

On Sat, 20 Feb 1999 21:14:15 EST Brad Spear <SSGSPEAR@AOL.COM> writes:

I hope the steering rack is the same as the standard Vanagon, I just
installed one today on my son's Syncro. We didn't quite finish the job,
as we didn't know we had to remove the hydraulic fittings from the old
rack and put them on the new one. We wanted to get our core deposit back
today, so we returned it to the store, an 80 mile round trip, before they
closed at 2:00. But just in case, I checked the Bus Depot web site and
they list the same number for both the standard and Syncro. So, it looks
like all the parts are the same.

>I think this is it:
>Front Discs:  Standard
>Pads:  Standard
>Steering Rack:  Not Standard
>Upper Right Ball Joint:  Standard
>Front Outter CV Joint Boot:  Don't have them on 2WD, Not Standard
>
>Hope this helps!
>
>Brad Spear
>'72 Westy
>"87 Syncro GL
>