Date:         Sun, 21 Feb 1999 14:53:11 -0800
Reply-To:     Davidson <wdavidson@THEGRID.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Davidson <wdavidson@THEGRID.NET>
Subject:      Re: [Fwd: Mail failure]
Comments: To: "Laurence W. Burt" <lwburt@SPIRITONE.COM>
Content-Type: text/plain; charset="iso-8859-1"

I get it too.
Bill
-----Original Message-----
From: Laurence W. Burt <lwburt@SPIRITONE.COM>
To: vanagon@GERRY.VANAGON.COM <vanagon@GERRY.VANAGON.COM>
Date: Sunday, February 21, 1999 2:38 PM
Subject: [Fwd: Mail failure]


>Folks
>
>Whenever I send a message to the group at the above address,
>vanagon@GERRY.VANAGON.COM, the message seems to get posted, but I also
>get an error message reply, for example:
>
>Subject:
>         Mail failure
>   Date:
>         Sun, 21 Feb 1999 17:27:00 -0500
>  From:
>         POSTMASTER@usatpoe.gannett.com
>     To:
>         "Laurence W. Burt" <lwburt@SPIRITONE.COM>
>
>FROM: USATODAY/USATPOE/POSTMASTER
>TO: Laurence W. Burt
>DATE: 02-21-99
>TIME: 17:28
>SUBJECT: Mail failure
>-----------------------------------------------------------------------
>
>[002] Mail was received that was addressed to unknown addresses.
>Mail item was not delivered to:
>USATODAY/USATPOE/FMBUNWE
>
>What's up? Am I doing something incorrect by replying directly to
>"vanagon@GERRY.VANAGON.COM" or should I just be using the "re:" function
>on my mail program. I thought that doing the latter would only reply to
>the individual rather than to the the list.
>
>Thanks
>Larry Burt, lwburt@spiritone.com
>