Date:         Mon, 15 Feb 1999 08:19:06 -0600
Reply-To:     Darrell Boehler <midwesty@MIDWEST.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Darrell Boehler <midwesty@MIDWEST.NET>
Subject:      Re: wiring conduit?
Content-Type: text/plain; charset="iso-8859-1"

---------------
Hi Volks,
    I like running wires through the frame member. There are holes all along
it with some in the engine compartment and some near the spare tire.  I have
found about 5 #18 wires  and  then a flat  50 wire scsi cable can move
enough data back and forth. Most gauges work fine on the flat cable wiring.
Circuit specialists at   cir.com has good prices on flat cables, it comes in
20 - 60 conductor.
Darrell Boehler
Makanda Illinois

-----Original Message-----
From: Alan Bosch <arbosch@RA.ROCKWELL.COM>
To: vanagon@GERRY.VANAGON.COM <vanagon@GERRY.VANAGON.COM>
Date: Monday, February 15, 1999 7:40 AM
Subject: Re: wiring conduit?


>All depends on where you want to use it.  Being plastic, I imagine it can
>be infulenced by heat.  There's something called "greenfield", looks like
>BX or MC cable, but with out the wires.  Flexible to a point, it MAY be a
>better conduit if you are running wires near a heat source, rather than the
>plastic stuff.
>
>Alan Bosch
>'88 Wolfsburg (Phred)
>
>
>
>
>Davidson <wdavidson@THEGRID.NET> on 02/14/99 11:58:17 AM
>
>Please respond to Davidson <wdavidson@THEGRID.NET>
>
>To:   vanagon@GERRY.VANAGON.COM
>cc:    (bcc: Alan R Bosch/Sales/RA/Rockwell)
>Subject:  wiring conduit?
>
>
>
>
>Any reason NOT to use the black plastic tubing that comes in rolls at the
>hardware store as protective covering for automotive wiring?
>Anything better to use?
>Thanks
>Bill
>90 Westy Syncro
>Lake Tahoe & Santa Rosa
>