In a message dated 2/27/99 9:30:11 AM Alaskan Standard Time, DeHanschke@AOL.COM writes: << When I find a way to hook a cooler in the system (I need to do so because I will have a 5Cyl.Turbo on the automatic tranny) I will post this on the list. >> Hey Volks, I have already done the parts research on this and currently have a tranny cooler bypass installed on my 86 with the parts. Involved the following: 2 ea. M12 hydraulic fitting ( I had to match the thread pitch) 2 ea. Elbows w/press on nipple on one end (These are relatively new....see next item) Press fit hydraulic line (This is blue stuff and is rated up to 500 psi and doesn't require clamps or crimps - neat stuff) Check your local hydraulic supply dealer. The fittings were pricey but its a neat and clean setup. Scott De Santi 86 Vanagon |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.