I just purchased a new LP tank for my '87 Westy Syncro from Manchester. I wanted to replace the two copper lines and fittings because they were very coroded. I can't seem to find a left threaded reducing bushing to go from the tank valve to the regulator. Also, the nipple was welded to short and now I need to use a couple of 90's comming off the valve to bring the regulator out far enough to spin on. Any ideas on installing a new regulator and tank on a '87 Westy would be apprieacted. Dana E Hager Nazareth, PA |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.