Date:         Sat, 27 Feb 1999 18:07:52 EST
Reply-To:     Scooter061@AOL.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Scott Desanti <Scooter061@AOL.COM>
Subject:      Re: Transmission cooler for 86 automatic?
Comments: To: DeHanschke@aol.com
Content-type: text/plain; charset=US-ASCII

In a message dated 2/27/99 9:30:11 AM Alaskan Standard Time,
DeHanschke@AOL.COM writes:

<< When I find a way to hook a cooler in the system
 (I need to do so because I will have a 5Cyl.Turbo on the automatic tranny)
 I will post this on the list.
  >>
Hey Volks,
        I have already done the parts research on this and currently have a tranny
cooler bypass installed on my 86 with the parts.  Involved the following:

2 ea. M12 hydraulic fitting
        ( I had to match the thread pitch)
2 ea. Elbows w/press on nipple on one end
        (These are relatively new....see next item)
Press fit hydraulic line
        (This is blue stuff and is rated up to 500 psi and
        doesn't require clamps or crimps - neat stuff)

Check your local hydraulic supply dealer.  The fittings were pricey but its a
neat and clean setup.

Scott De Santi
86 Vanagon