|
Perhaps the bigger front discs would be better than rear discs. I have all the part numbers for the rotors, calipers, etc. However I am not totally sure if it is that simple. I believe that the front wheel assembly is different also the tie rod ends are different too. So if you have to change out all of these parts the kit becomes pretty expensive. The good side would be defineatly the better stopping power, the bolt up, stock VW setup, and that you need to use 15" rims on any van that has the bigger brakes ( I am smiling). That is why the alloys I get from SA are all 15" because of the larger front brakes (and you all thought they were just trying to be cooler than us here in the US). :) If anyone is interested in making this kit happen please let me know. Ken Wilford Van-Again John 3:16 |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.