Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (March 1999, week 1)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Wed, 3 Mar 1999 07:23:04 -0500
Reply-To:     EMZ <vw4x4@FYI.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         EMZ <vw4x4@FYI.NET>
Subject:      Re: low compression problem
Comments: To: Mark Schrope <mschrope@CATS.UCSC.EDU>
In-Reply-To:  <v01540b02b30237521a15@[128.114.128.127]>
Content-Type: TEXT/PLAIN; charset=US-ASCII

Your mechanic seams to be up front with you. Assuming you don't have a stuck oil pressure relief valve. I would drive it as stated. In time if other problems don't come up, and you still have low compression in the same cyl. I would have him do the job.

Eric 86-VW4x4 vw4x4@fyi.net 72-240z Pittsburgh, PA USA 1936-Chrysler

On Wed, 3 Mar 1999, Mark Schrope wrote:

> Hi everybody > > I was on the list until last September but had to sign off when I moved > here to California for school and got too swamped with work to read any > email. > > I've got a problem now with my compression and was hoping to get some > advice. I'm dribing and '89 by the way. Basically it looks like I've got > a sticky valve. The mechanic was troubleshooting something else and found > that air shot into the #2 cylinder was coming out the exhaust. The > compression was 75 as of two weeks ago but it feels like I may have lost a > little bit more power recently. > > The mechanic said that I might as well keep driving it for now but I'm > having second thoughts. I put a lot of miles on the van and I will likely > be driving back across the country this summer so I'm thinking I might as > well get the work done now. > > He said that the valve would have to be redone and if we were going to be > in that far I might as well have the headgaskets done on both sides-- the > last head gasket job was about 70,000 miles ago. Ballpark estimate was > about 700 to do the one side and deal with the valve or just over 1000 for > everything. > > I'm inclined to get it all done with at once. So, I was hoping to get some > feedback from others on whether this sounds like the best plan. Any > thoughts or comments would be appreciated as I agonize whether to spend > this kind of money. Thanks in advance and please p-mail as I'm not getting > the list. > > Mark Schrope > '89 Wolfsburg >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.