Mike, >BTW what is a 17mm "socket tool"??? It is a socket that is a 17 mm allen wrench on one side and a 3/8" socket on the other. A 17 mm head bolt and a pair of vise grips will work. Also screw a bolt down tight on the bolt and use a wrench to remove the plug. Use only 3.2 quarts. The level should be @15mm BELOW the fill hole. If you put too much in the shifting will be difficult into second gear. Robert Robert
_______________________________________________________ Get your free, private email at http://mail.excite.com/ |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.