In a message dated 99-03-12 16:09:19 EST, RFeuerriegel@BC.SYMPATICO.CA writes: << Thanks all who responded on the Audi gauges. Lots of info. Question. Is it easier to remove the heater panel and cut the opening, or do it with the panel in place. I noticed in the Bentley that the panel is glued to the heater pipes. >> the plastic heater cover slides straight out. it is not glued in place, but requires some patience to get it out...just make sure your van's interior is nice and toasty before you attempt to remove it, plastic tends to break easy when its cold. chris |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.