Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (March 1999, week 2)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Tue, 9 Mar 1999 19:06:54 -0500
Reply-To:     Stu Schwartz <sschwartz@OS2BBS.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Stu Schwartz <sschwartz@OS2BBS.COM>
Subject:      Frozen accelerator cable
Content-Type: text/plain; charset="us-ascii"

I have this problem..it seemed to only happen when it was cold and I floored it to go up a hill. Then it happenend while warm...it is going into the shop this week. I thought it was at the carburetor...seems to be a week spring combined with heavy grease. The only way I could unstick it was by pulling the cable at the carburetor. I am NOT a weekend mechanic...I will let you know how they fixed it.

On Tue, 9 Mar 1999 10:03:47 -0800, Automatic digest processor wrote:

>Date: Tue, 9 Mar 1999 08:05:00 +0000 >From: Rob Lebo <robl@REDLION-CONTROLS.COM> >Subject: Frozen Accelerator Cable > >'91 Carat has a frozen accelerator cable. Drove to Philadelphia last Wed night >in rainstorm. Driving to work Thursday in the snow and throttle stuck. Tapped >the pedal and it stuck in place!. Through it in Neutral and turned off the engine. > Unstuck with a pull back on the pedal. Scary. Next few days it was ok. >Sunday, frozen again with sub freezing weather and wind. Checked out the >linkage under the front of the van and at the throttle body in the rear. All looked >well. The problem is at he pivot point on the automatic trans. Didn't want to >risk crawling under it with only the factory jack. Waiting to make arrangements >with a friend who has a garage with a pit. Easier access. So...any of you >listees ever had this problem?? How did you get the water out of the cable >jacket? Since I haven't see the linkage, I can only surmise that the accordian >boot is shot at the trans linkage. Have any of you ever pulled the cable out of >the jacket? What grease/oil did you use to re-lube. Any tips on reinstalling? >All advise welcome. Thanks. >Rob Lebo >'91 Carat >York, PA

--peace-- stu 1991 Westy - MS MAGIC


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.