Date:         Sun, 14 Mar 1999 21:08:42 EST
Reply-To:     kenneth d lewis <kdlewis@JUNO.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         kenneth d lewis <kdlewis@JUNO.COM>
Subject:      Re: High Performance Wasseboxers?
Comments: To: midwesty@MIDWEST.NET

Darrell;
It must be late; I tried to do the math but I could not get the numbers
to work out. Theoretically the displacement of an engine is piston
diameter times stroke times number of cylinders. Maybe someone else (with
more sleep) can figure it out.
Drive Safely & Good Luck
Ken Lewis<Kernersville,NC>86 VW crewcab;60 T-5 Coupe

On Sun, 14 Mar 1999 11:11:38 -0600 Darrell Boehler <midwesty@MIDWEST.NET>
writes:
>----------------
>Hi Volks,
>    I got a note back from people with the high performance
>wasserboxer add.
>They increase the  bore from 94  to 96.5 mm with oversized pistons and
cylinders. They install a stroker 76mm ?? stroker crank.  I think the
standard crank is also 76mm but bentley feels this is information that
most

___________________________________________________________________
You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at http://www.juno.com/getjuno.html
or call Juno at (800) 654-JUNO [654-5866]