EVERY time from EVERY dead stop or just the first like the first time you move in the morning? If the former I couldnt say what the trouble is but if the latter check the breaks on that side. Once I had a rotor that "stuck" to one of the pads due to some kind of gunk that was splashed on there and I guess got imbedded in the pads. The "clunk" I heard in the morning was the rotor "breaking free" of the pad after being stuck overnight. I have no idea what the "gunk" was or where it came from but a fresh set of break pads and a little scrubbing of the rotor fixed it. -----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com]On Behalf Of Jeffrey R Sent: Sat, March 20, 1999 3:10 PM To: vanagon@GERRY.VANAGON.COM Subject:
When starting from a dead stop there is a clunk which seems to be coming from the passenger front wheel/suspension area. A preliminary look both on the ground and jacked up did not reveal any glaring problems. I understand the torsion bar could be suspect. Is there a trick to investigating this. It appears fine, but I understand a crack can be ellusive. (I have a 2-wheel drive 83.5 Westy) TIA Jeff 83.5 Westy NYC |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.