From: John Andersen <tincat@EARTHLINK.NET> > The needle is small enough to not leave a hole for crap to go thru, >you could also put under the clamp or tywrap on the end.
the way i've always seen it done (at independent porsche mechanics) is with a larger needle-nozzle and sticking the needle between the axles and the small end of the rubber boot, by sticking a small phillips-head screwdriver in first to create a little room. they removed the clamp on that end first, of course. :) joel |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.