"Robert A. Alexander" wrote: > Jim - BTW, ask for a "luer lock" syringe!!! The hub of the needle > screws into the tip of the syringe. You can develop all the pressure > you need this way to get that grease flowing. The friction fit syringe > just won't hack it. > > BOB Bob, the 20cc syringe I bought was no problem to press, I pressed until the hand ached, but the needle didn't pop. I also cut the length of the needle about 2/3, it was much easier to press after that. Anyway, the needle is way too thin to fill a cv joint, but steering knuckles and other small items are no problem. PerL |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.